Request Adhesives, Chemicals & Lubricants Components Like AHCI1DV by Hoffman!

Mfg Part Number : AHCI1DV

Manufacturer: Hoffman

Category: Adhesives, Chemicals & Lubricants

Sub Category: Chemicals

Details Description: Use Corrosion Inhibitors to protect electronic components inside the enclosure against corrosion. It is simple and economical to use; no surface preparation is required and puts protected equipment to use immediately without degreasing or coating removal. Each inhibitor contains a special chemical combination that vaporizes and condenses on all surfaces in an enclosed area. Vapors will redeposit as needed in the event of condensation of moisture on surfaces. These vapors reach every part of an enclosure, protecting all interior components. They do not interfere with electrical, optical or mechanical surface properties. Protection is effective even in salt-water atmospheres. The AHCI5E and AHCI10E emitters have additional red-metal inhibitors for further protection. The normal useful life-span of Hoffman corrosion inhibitors is in excess of one year. However, inhibitor life expectancy is shortened by approximately 25 percent when exposed to temperatures above 104 F (40 C). This product is not recommended for use where temperature exceeds 199 F. Since Corrosion Inhibitors are vapor-phase protective, all surfaces to be protected should be accessible to the vapors. The maximum distance the vapors can travel is approximately 1.50 ft. (.46 m). Protection of long, narrow enclosures can be achieved with tape or multiple inhibitors. Each Corrosion Inhibitor is individually packaged in a resealable bag for maximum effectiveness at the time of usage. Corrosion inhibitors should be stored at temperatures not exceeding 120 F (45 C ). Hoffman corrosion inhibitors are not returnable. When determining the proper corrosion inhibitor for your application, assume the enclosure volume to be protected is greater than calculated if (1) cabinet doors are opened frequently, (2) cabinet is located in an extremely corrosive area and/or (3) cabinet length divided by depth is greater than four.

Description: AHCI1DV Industrial Corrosion Inhibitors, for 1 cu.ft.

Welcome to the industrial RFQ page on ASAP Industrial Services; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable item in our inventory of Chemicals parts, this AHCI1DV Industrial Corrosion Inhibitors, for 1 cu.ft. component with part number AHCI1DV is available for purchase at any time. This item is manufactured by Hoffman, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers, wherever they are located.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

If you are interested in purchasing part number AHCI1DV by Hoffman, we encourage you to begin by submitting the Request for Quote (RFQ) form below to receive a competitive quote in 15 minutes or less. Using the details you include in your form, about shipping deadlines, desired quantity, and more, we will find a solution that caters to your particular situation. Additionally, if you would like to explore other AHCI1DV Industrial Corrosion Inhibitors, for 1 cu.ft. items or similar products, we invite you to return to our page of Adhesives, Chemicals & Lubricants products or look at the list of related items below. Start the purchasing process on any item of interest today to learn all that ASAP Industrial Services can do as your sourcing partner!

Product Characteristics of AHCI1DV

12-Digit UPC	783510305901
Applications	For Electrical Enclosures, Boxes, Consoles and Wireways, Interior Components of Electronic Enclosures, Electrical and Electronic Equipment and Controls, Parts and Components that are Package, Controls and Drives, Corrosive Environments, Power Distribution
Brand	nVent Hoffman
Color	Alum/Black
Container Size	1 cu ft
Finish	Aluminum
GTiN	00783510305901
Height	0.3 Inch
Length	4-1/2 Inch
Material	Aluminum
Product UPC	78351030590
Size	for 1 cu.ft. in
Sub Brand	Hoffman
Type	Cooling Accessories
Weight	0.44 lb
Width	1.50 in

Related Industrials Components of AHCI1DV

AHC-4060-4-L
Extrusions, Supports & Struts
Aluminum Extrusion Hinge, AHC (AHC-4060-4-L)
Nic Autotec

AHC-4060-4-L-BNH
Extrusions, Supports & Struts
Aluminum Extrusion Hinge Fastener Set, AHC (AHC-4060-4-L-BNH)
Nic Autotec

AHC-4060-4-L-BNHS
Extrusions, Supports & Struts
Aluminum Extrusion Hinge Fastener Set, AHC (AHC-4060-4-L-BNHS)
Nic Autotec

AHC-4060-4-R
Extrusions, Supports & Struts
Aluminum Extrusion Hinge, AHC (AHC-4060-4-R)
Nic Autotec

AHC-4060-4-R-BNH
Extrusions, Supports & Struts
Aluminum Extrusion Hinge Fastener Set, AHC (AHC-4060-4-R-BNH)
Nic Autotec

AHC-4060-4-R-BNHS
Extrusions, Supports & Struts
Aluminum Extrusion Hinge Fastener Set, AHC (AHC-4060-4-R-BNHS)
Nic Autotec

AHC-6090-6-L
Extrusions, Supports & Struts
Aluminum Extrusion Hinge, AHC (AHC-6090-6-L)
Nic Autotec

AHC-6090-6-L-BNH
Extrusions, Supports & Struts
Aluminum Extrusion Hinge Fastener Set, AHC (AHC-6090-6-L-BNH)
Nic Autotec

AHC-6090-6-L-BNHS
Extrusions, Supports & Struts
Aluminum Extrusion Hinge Fastener Set, AHC (AHC-6090-6-L-BNHS)
Nic Autotec

A Complet Industrial Automation Part Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification

	Guaranteed On - Time Delivery
	Customized & User-Friendly Database
	Over 5100 Manufacturers
	Competitive Prices
	Scheduling Flexibility
	Complete Purchasing Solutions