On ASAP Industrial Services, customers within the aviation sector can find top-quality items by trusted and traceable manufacturers across the globe. In our catalog of L. H. Dottie products, you will find top-searched part numbers like MFR #:MBS1434, MFR #:GBL250, FWGN14, MFR #:RW75, MFR #:R357, MFR #:5MB14212, MFR #:UT12D, and others, those of which are all readily available for purchase. If any of the components listed here capture your interest, you can receive a custom quote for your comparisons in 15 minutes or less using our RFQ form. Simply provide details about your part requirements, and an expert member of our team will find a solution catered to your situation with a cost-saving in mind!
Displaying Page: 39 of 49
| Part No. | Description | Category | Sub Category | Availability | RFQ |
|---|---|---|---|---|---|
| MFR #:MBS1434 | Stainless Steel Hex Head Cap Screws With Partial Thread, 1/4 x 3/4 in., Pack of 100 | Fasteners & Hardware | Bolts | Avl | RFQ |
| MFR #:GBL250 | Grounding Bushing, Aluminum, Rigid/IMC Conduit, Insulated, 2-1/2 in., 14 to 1/0 AWG | Fittings | Bushings, Locknuts And Chase Nipple... | Avl | RFQ |
| FWGN14 | Zinc plated steel 1/4 in. flat washer and neoprene gasket with 5/16 in. I.D. and 3/4 ... | Electrical Supply | Fasteners And Hardware | Avl | RFQ |
| MFR #:RW75 | Reducing Washer, Steel, Zinc Plated Finish, 1-1/2 I. D. x 2-1/2 in. O. D. | Fittings | Reducing Bushings And Washers | Avl | RFQ |
| MFR #:R357 | Reducing Bushings, Steel, Zinc Plated, Threaded Connection, 1-1/4 x 1 in. | Fittings | Reducing Bushings And Washers | Avl | RFQ |
| MFR #:5MB14212 | 1/4 x 2-1/2 in. Zinc Plated Steel Hex Head Cap Screws With Partial Thread | Fasteners & Hardware | Bolts | Avl | RFQ |
| MFR #:UT12D | Underground Tape, Non-Adhesive Polyethylene, 4 mil, Red, 1000 ft. L x 3 in. W | Safety | Warning Tapes And Chains | Avl | RFQ |
| MFR #:25 | Bare Ground Clamps | Wire Termination And Supplies | Grounding | Avl | RFQ |
| MFR #:6502P | 6500 ft. Two Ply Pull Line (Pail) | Tools And Testing | Wire And Cable Pulling Tools | Avl | RFQ |
| MFR #:SC200E | L H Dottie Electrical Metallic Tubing (EMT) Strut Clamp, 2 Inch | Conduit, Raceway And Cable Sup... | Strut & Accessories | Avl | RFQ |
| MFR #:PHSMSS81 | No. 8 x 1 in. Stainless Steel Pan Head Phillips Sheet Metal Screws (100) | Fasteners & Hardware | Screws | Avl | RFQ |
| MFR #:BT19 | 3 in. x 1000 ft. Yellow Barricade Tape (Caution Open Trench) | Safety | Warning Tapes And Chains | Avl | RFQ |
| MFR #:VP58 | Hole Saw, 3-5/8 in. | Tools And Testing | Saws | Avl | RFQ |
| MFR #:FT6716 | Phillips Pan Head Framer Screws, Black Oxide Metal Piercing, No. 6 x 7/16 in., Pack o... | Fasteners & Hardware | Screws | Avl | RFQ |
| MFR #:FM63234 | Flat Head Slotted Machine Screws, Zinc Plated Steel, 6-32 x 3/4 in. | Fasteners & Hardware | Screws | Avl | RFQ |
| MFR #:SC300R | Rigid Strut Clamp ,3 INCH | Conduit, Raceway And Cable Sup... | Strut & Accessories | Avl | RFQ |
| MFR #:CT32 | Carbide Tipped Hole Cutter, Steel, 2 in. Dia., 1-1/2 in. Conduit | Tools And Testing | Cutting Tools | Avl | RFQ |
| 1104 | PECO FASTENERS 4 PCKT TOOL HLDR SOLD/EA 48/CASE | Test & Measurement Equipment | Tool Storage | Avl | RFQ |
| MFR #:IB2P4 | Phillips No. 2 Power Bit, # 2 x 4 in. | Tools And Testing | Screwdrivers And Nutdrivers | Avl | RFQ |
| MFR #:MT38L | Magnetic Tool Holder, Hexagonal, 2-9/16 in. L x 3/8 in. | Tools And Testing | Drills And Drivers | Avl | RFQ |
| MFR #:2WS14114 | #14 x 1 1/4 in. Pan Head Phillips/Slotted (2 Way) Sheet Metal Screws | Fasteners & Hardware | Screws | Avl | RFQ |
| MFR #:PS1624 | PS1 Series, Plate Strap, Steel, 1-1/2 in. L x 24 in. W, 16 Gauge Thickness | Fasteners & Hardware | Nail Plates | Avl | RFQ |
| MFR #:TB125 | 1/2 x 5 in. Zinc Plated Steel Slotted Toggle Bolts With Mushroom Head and Spring Wing... | Fasteners & Hardware | Bolts | Avl | RFQ |
| MFR #:632TCS | Zinc Plated Low Profile Truss Head Phillips/Slotted Machine Screw Kit | Fasteners & Hardware | Screws | Avl | RFQ |
| MFR #:SB142 | Screw, Steel, Zinc Plated Finish, 1/4 in. -20 Screw, Truss Head, Stove Bolt, Slotted ... | Fasteners & Hardware | Screws | Avl | RFQ |
| MFR #:TEKPH812 | Self Drilling Screws, Phillips Pan Head, Zinc Plated Steel, No. 8 x 1/2 in. | Fasteners & Hardware | Screws | Avl | RFQ |
| RJK3 | Roof Jack Kit | Electrical Supply | Fittings | Avl | RFQ |
| MFR #:LT90100 | Liquid Tite Connector, Die Cast Zinc, Threaded, 90 deg Insulated, 1 in. Trade, 3.80 L... | Fittings | Connectors And Couplings | Avl | RFQ |
| MFR #:CD3165 | Masonry Drill Bit, 3/16 in. x 5-1/2 in. | Tools And Testing | Drills And Drivers | Avl | RFQ |
| MFR #:LAG516312 | 5/16 in. x 3-1/2 in. Hex Head Lag Screw | Fasteners & Hardware | Screws | Avl | RFQ |
| MFR #:TMC6322 | 6 32 x 2 in. Zinc Plated Steel Truss Head Phillips/Slotted Machine Screws (100) | Fasteners & Hardware | Screws | Avl | RFQ |
| MFR #:LWS34 | 3/4 in. Stainless Steel Lock Washer | Fasteners & Hardware | Washers | Avl | RFQ |
| MFR #:DU09 | Marking and Warning Tapes and Chains, Polyethylene, Red | Safety | Warning Tapes And Chains | Avl | RFQ |
| MFR #:SA14214 | Sleeve Anchor With Acorn Nut, Zinc Plated Steel, 1/4 x 2-1/4 in., Pack of 100 | Fasteners & Hardware | Anchors | Avl | RFQ |
| MFR #:FWBR14 | 1/4 in. Solid Brass Flat Washer (100) | Fasteners & Hardware | Washers | Avl | RFQ |
| PHFSMS6114 | Flat Head Screw, Screw Size No. 6, Length 1 1/4 in | Electrical Supply | Fasteners And Hardware | Avl | RFQ |
| BLH1224 | Dottie L H Company BLH1224 PC 6280 Bell Hanger Drill, 24 IN Overall Length, 1/2 IN Sh... | Test & Measurement Equipment | Drill Bits, Sets And Accessories | Avl | RFQ |
| MFR #:MB38114 | 3/8 x 1-1/4 in. Zinc Plated Steel Hex Head Tap Bolts (100) | Fasteners & Hardware | Bolts | Avl | RFQ |
| MD8L | Dottie L H Company 3/4 X 6" Masonry Drill Bit ( Carbide Tip ) | Test & Measurement Equipment | Drill Bits, Sets And Accessories | Avl | RFQ |
| MFR #:WS12334 | 1/2-13 Stainless Steel Full-Thread Wedge Anchors, Overall Length 3-3/4 in. (50) | Fasteners & Hardware | Anchors | Avl | RFQ |
| MFR #:SB31634 | Stove Bolt, Steel, Truss Head, Zinc Plated, 24 TPI, 10 in. Dia. x 3/4 in. L | Fasteners & Hardware | Bolts | Avl | RFQ |
| MFR #:DDFW6114 | Flat Head Wood Screw, Steel, Square Drive, Zinc Plated Finish, #6 x 1-1/4 in. L | Fasteners & Hardware | Screws | Avl | RFQ |
| 5HN14US | Finished Hex Nut, Grade 5, Zinc Plated, Size 1/4-20 | Electrical Supply | Fasteners And Hardware | Avl | RFQ |
| MFR #:271H | 1-1/4 in.-2 in. Bronze Ground Clamp w/ 3/4 in. Hub | Wire Termination And Supplies | Grounding | Avl | RFQ |
| MFR #:HPC1732 | 1-7/32 in. Push Button Knockout Cup, Oil Tight | Tools And Testing | Punching Tools | Avl | RFQ |
| MFR #:200MTBLUE | L.H. Dottie Outdoor Masking Tape, Blue | Industrial And Maintenance Sup... | Adhesives, Sealants And Tapes | Avl | RFQ |
| MFR #:BT12 | 3 in. x 1000 ft. Yellow Barricade Tape (Caution High Voltage) | Safety | Warning Tapes And Chains | Avl | RFQ |
| MFR #:413IV | 6-32 x 5/16 in. Ivory Oval Head Slotted Wall Plate Screws (100) | Wiring Devices | Wallplates And Accessories | Avl | RFQ |
| MFR #:SUB325 | U-Bolt Beam Clamp, Steel, 3-1/4 in. Size, 12.4 L x 5.9 H x 10 in. W | Fittings | Conduit Beam Clamps | Avl | RFQ |
| TWH1 | T handle tap wrench with capacity 0 to 8 Machine Screw, 1/16 to 5/32 Inch | Test & Measurement Equipment | Tapping Tools | Avl | RFQ |
|
Guaranteed On - Time Delivery |
|
|
Customized & User-Friendly Database |
|
|
Over 5100 Manufacturers |
|
|
Competitive Prices |
|
|
Scheduling Flexibility |
|
|
Complete Purchasing Solutions |
The only independent
All Orders are Fulfilled in the U.S.A.All shipments must comply with U.S.A export laws.No exceptions.
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
Request for Quote
